Steering Bearing; Removing The Rear Wheel - Derbi Rambla 250 Manual

Suspensions

Steering bearing

Check that the ball contact area «1» on the rotating
seat «2» and on the fixed seat «3» is not damaged
or too worn. Replace the whole bearing if neces-
sary.
CAUTION
CHECK THAT THE COMPONENTS ARE IN GOOD CONDI-
TIONS.
CAUTION
APPLY GREASE ON BALL CONTACT AREAS ON BOTH
SEATS «2» AND «3».
Rear

Removing the rear wheel

KEY:
1. Grey rear wheel rim;
2. Rear cover;
3. Internal wheel spacer;
4. External wheel spacer;
5. Nut;
6. Cap;
7. Split pin;
SUSP - 205