Derbi Rambla 250 Manual page 235

Chassis
•
Undo and remove the screw.
•
Undo and remove the screw.
•
Push aside the tail section.
•
Remove the fairing by sliding it off the
hooks, being careful with the tongues
and related fitting slots.
Passenger footrest removal
•
In riding position, rotate the passenger
footrest «1».
•
Lift the footrest upper rubber edge «3».
•
Slide and remove the pin «4».
•
Remove the passenger footrest «1».
NOTE
THESE OPERATIONS REFER TO ONLY ONE PASSENGER
FOOTREST BUT THEY APPLY TO BOTH.
NOTE
THIS OPERATION IS NECESSARY ONLY TO REMOVE THE
METAL PART OF THE FOOTREST. TO REMOVE FAIR-
INGS, JUST REMOVE THE PASSENGER FOOTREST RUB-
BER.
CHAS - 235