Device Status; Adjustable Parameters; Errors Display - Derbi Rambla 250 Manual

Injection
Specification
Engine status (Off/running)
Rpm sensor (Synchronised/Not synchron.)
Idle/full load (on/off)
Active lambda probe (on/off)
Specification
Throttle position self-learning
Self-adjustable parameters reset
Specification
Error clearing
Fuel pump
Rpm indicator
Injectors
Electric fan
Idle motor
Specification
Pressure
Lambda Probe
Water temperature
Air temperature (°C)
Battery voltage
Idle motor
Fuel pump relay
Electric fan
Self-adjustable parameters
RAM memory
ROM memory
EEPROM
Microprocessor
Rpm sensor
INJEC - 152

DEVICE STATUS

ADJUSTABLE PARAMETERS

DEVICES ACTIVATION
Coil

ERRORS DISPLAY

Throttle
Injector
Coil
Desc./Quantity
Engine off or running
Synchronised if the control unit detects a correct synchronisa-
tion (by means of the crankshaft rpm detection sensor
ON if idle functioning
ON if the control unit is using the lambda probe signal to keep
the stoichiometric combustion
Desc./Quantity
Just press the ENTER button to save the throttle closed posi-
Lambda probe self-adaptability parameters reset (if a new en-
gine, a new lambda probe or a new injector is installed)
Desc./Quantity
Press "enter" to transfer errors from the memory (MEM) to the
historical record (STO). The next time Axone is connected to
the ECU, the errors in the historical record (STO) will no longer
be displayed
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
The device is activated: if it is not correctly activated, this will
be immediately shown in the Axone screen page
Desc./Quantity
If the throttle position sensor signal is interrupted
If the atmospheric pressure sensor signal is interrupted
Displayed if the probe signal circuit is interrupted
Sensor, circuit or relevant connectors interrupted
Sensor, circuit or relevant connectors interrupted
Sensor, circuit or relevant connectors interrupted
Sensor, circuit or relevant connectors interrupted
Sensor, circuit or relevant connectors interrupted
Sensor, circuit or relevant connectors interrupted
Control unit internal error
Control unit internal error
Control unit internal error
Control unit internal error
If the crankshaft rpm detection sensor is disconnected, this er-
ror is not shown
tion