Refitting The Rear Wheel; Shock Absorbers - Derbi Rambla 250 Manual

Suspensions
8. Brake disc;
*9. TE flanged screw;
10. SPEED SENSOR screw;
11. Tubeless valve.
•
Rest the vehicle on its centre stand.
•
Remove the exhaust silencer.
•
Remove the rear right shock absorber.
•
Slide off the rear brake calliper and
keep it connected to the oil pipe.
•
Remove the split pin «1» placed on the
wheel pin.
•
Remove the nut cover «2».
•
Unscrew and remove the wheel pin nut
«3» and the shim washer «4».
•
Undo and remove the two screws and
remove the muffler support plate.
•
Remove the spacer «5» placed on the
wheel pin.
•
Remove the rear wheel by sliding it off
from the right side.
CAUTION
UPON REMOVING/REFITTING, PAY ATTENTION NOT TO
DAMAGE THE BRAKE HOSES, DISCS AND PADS.
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE
BRAKE CONTROL LEVER; OTHERWISE, THE CALLIPER
PLUNGER COULD GO OUT OF ITS SEAT RESULTING IN
BRAKE FLUID LEAKAGE.

Refitting the rear wheel

For refitting, follow the operations in reverse order observing the tightening torque.

Shock absorbers

SUSP - 206