Braking system
CAUTION
UPON REFITTING, APPLY THE RECOMMENDED PRODUCT ON THE THREADING OF THE
BRAKE DISC SCREWS.
Recommended products
LOCTITE® 243 Loctite adhesive to assembly cylindrical pieces
Loctite adhesive to assembly cylindrical pieces
Disc Inspection
•
Carry out a visual inspection of brake disc surface. Replace the disc if scored or deteriorated.
•
Check the brake disc for wear by measuring the minimum thickness with a micrometer at
different points. Replace the disc if the minimum thickness, even at a single point of the disc,
is less than the minimum value.
CAUTION
OPERATIONS TO BE CARRIED OUT WITH BRAKE DISC FITTED ON THE WHEEL.
Characteristic
Minimum value for brake disc thickness:
3.8 mm
•
Using a dial gauge, check that disc os-
cillation does not exceed the tolerance;
otherwise, replace it.
Characteristic
Brake disc oscillation tolerance:
0.5 mm
Front brake pads
Removal
OPERATIONS VALID FOR BOTH FRONT CALLIPERS
•
Remove the front brake calliper.
BRAK SYS - 213