Specify The Destination - Canon imageRUNNER Advance C2030i Basic Operation Manual



Specify the Destination

Enter the fax number using the numeric keys.
Enter the fax number.
If you want to enter two or more fax numbers, press
[OK] → enter the next destination.
You can specify the destination using the
one-touch buttons or [Address Book]. For more
information on storing the destination, see e-
Manual > Sending/Receiving a Fax.

Start Sending the Fax
After specifying the settings, press
Press .
If the following screen appears, press
the next original. After all of the originals are
scanned, press [Start Sending].
When sending is complete, remove your originals.
If a login service, such as Department ID
Management or SSO-H has been set, press
(Log In/Out) to log out.
.
to scan