Positioning The Logo - Avaya 9640 Series Developer's Manual

Customizing the Skin

Positioning the Logo

While the use of the logo.jpg file is optional, there are some factors you need to consider to
ensure the image is positioned on the correct area of the screen. You can specify the exact
location of the image by adding a horizontal and vertical attribute value to the logo element in
the 9640.xml file.
In addition to the 9640 SIP IP Phone, the logo can also be changed on the 9620 and 9630 SIP
IP Phones.
In addition to the logo image file being 180 x 40 (pixels), the value of the:
x coordinate cannot be greater than 320.
●
y coordinate cannot be greater than 240.
●
!
Important:
The logo image will not be displayed if it is not positioned within the x and y
Important:
coordinates above.
For example, the following refernce to the logo in the 9640.xml file is allowed:
<logo>
<img src="logo.jpg" x="0" y="96"/>
</logo>
Tip:
You may need to experiment with the x and y values, as the size of the width and
Tip:
height of the logo file affect the exact positioning on the screen.
38 Avaya 9600 Series SIP IP Telephone Developer Guide