Konica Minolta bizhub C351 Network Scanner Operations page 76

3
– For details on the scan settings, refer to "Specifying the scan
settings" on page 3-48.
8
After specifying the settings, touch [OK].
9
Load the document into the optional ADF or position it on the original
glass of the machine.
10
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
3-34
Scanning documents
bizhub C351 (Phase3)