Konica Minolta bizhub C351 Network Scanner Operations page 144

4
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired
destination, and then touch [Delete].
Note
If [Registering and Changing Address] is restricted, use [One-Touch
Registration] in [Administrator Setting].
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
!
Detail
For the procedure to enter characters, refer to "Entering text" on
page 7-6.
4-14
Specifying settings from the control panel
bizhub C351 (Phase3)