Original Setting - Konica Minolta bizhub C351 Network Scanner Operations

Scanning documents

Original setting

Specify the type of document that is loaded, for example, if it contains mixed
sizes or is a thick document.
Note
These functions can be combined.
Item
Mixed Original
Thick Original
Original Direction
Bind
bizhub C351 (Phase3)
Description
Select this setting when documents of different sizes are load-
ed into the optional ADF. The scan speed is decreased since
the size of each page is detected before it is scanned.
Select this setting when Scanning a thick document.
Specifies the orientation of the document. The data is proc-
essed so that the top and bottom ends are correctly posi-
tioned when the document is scanned.
Specifies the binding position for punched holes and staples.
This function adjusts the binding position so that it is not re-
versed when a double-sided document is scanned.
Left: A document with a bind on the left side.
Top: A document with a bind on the top side.
Auto: If the length is 11-3/4 in. or less, the binding position is
along the long side of the paper. If the length is more than
11-3/4 in., the binding position is along the short side of the
paper.
3
3-65