Konica Minolta bizhub C351 Network Scanner Operations page 46

3
No. Part name
6 [Scan] key
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 Keypad
17 [C] (clear) key
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 Contrast dial
22 [Enlarge Display] key
3-4
Description
Press to enter Scan mode. While the machine is in
Scan mode, the indicator on the [Scan] key lights
up in green.
Press to enter Copy mode. (As a default, the ma-
chine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User manual [Copy Opera-
tions].
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in In-
terrupt mode." appears on the touch panel. To can-
cel Interrupt mode, press the [Interrupt] key again.
Press to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned
off, the machine enters a state where it conserves
energy.
Press the [Stop] key during scanning to stop the
scan operation.
Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
Lights up in green when the machine is turned on
with the auxiliary power button.
Flashes in green while a print job is being received.
Lights up in green when data is being printed.
Press to print a single proof copy to be checked be-
fore printing a large number of copies.
Use to type in the number of copies to be pro-
duced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad.
Press to display screens showing the specified set-
tings.
Press to display the Utility screen and Meter Count
screen.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
bizhub C351 (Phase3)
Scanning documents