Specifying settings from the control panel
Authentication
Specify whether to use authentication for access from other systems that
use OpenAPI. (Default setting: ON)
1
In the Administrator Setting screen, touch [System Connection]. (Refer
to page 4-10 for more details.)
2
In the System Connection screen, touch [1 OpenAPI Setting].
3
In the OpenAPI Setting screen, touch [Authentication].
The OpenAPI Setting screen appears.
4
Touch the desired key under "Authentication".
–
If "ON" is selected, proceed to step 5 and enter the login name and
password.
–
If "OFF" is selected, proceed to step 9.
5
Touch [Login Name].
bizhub C351 (Phase3)
4
4-161