Ricoh B234 Service Manual page 1319

To install the Paper Guide Assembly into the StreamPunch.
Step 15:
PAPER ENTERANCE
SIDE
As you slide the Paper Guide Assembly into place,
A.
a. Hook up the Sensor Harness to the Sensor on the back.
b. Lift it up slightly to clear the lower Transition Paper Guide.
c. Be sure to clear the Sensor Bracket at the top left.
d. Be sure that the Flex Coupling Shaft is sticking out of the rear of the
StreamPunch properly.
Visually check all around the mounting area of the Paper Guide Assembly and that
B.
the Sensor Harness is properly connected.
ALIGN
& FIX SCREWS
FRONT DOOR
SIDE
D
ASSEMBLE BACK
PAPER EXIT
SIDE
35