3.4 STAPLING
2
5
3
4
Here is the operation sequence for jogging and stapling:
The lower jogger fence lifts to receive the sheets.
①
The top fence moves down, to the horizontal position.
②
A sheet of paper goes into the stapler tray.
③
The positioning roller turns when each sheet is fed to the stapler tray.
④
Each sheet is fed down against the lower jogger fence to align the bottom edge.
⑤
After the set number of sheets come in, the top fence motor switches on and lowers
⑥
the top fence against the top of the stack. This aligns the stack for stapling.
The bottom fence motor lowers the aligned stack to the stapling position.
⑦
The stapler staples the stack.
⑧
SM
1
B830D004.WMF
45
DETAILS
B830D005.WMF
B830