Ricoh B234 Service Manual page 1306

• Before adjusting the die set position cradle, you must first note what direction the die set cradle
must move.
• Before you adjust the die set position cradle, you must loosen the lock-down screw.
• Observe the punched paper; if the punched-holes are too close to the rear of the machine, then
you must turn the adjustment screw counter-clockwise.
PRESS HERE
TO TILT
LOCK-DOWN
SCREW
PRESS HERE
TO TILT
LOCK-DOWN
SCREW
ADJUSTMENT
SCREW
ADJUSTMENT
SCREW
22