Ricoh B234 Service Manual page 1246

10. Push the stapling unit into the finisher and close the front door.
11. Do a folding test.
• Switch the copier on.
• Put one page of A3 or DLT paper in the ARDF.
• On the copier operation panel, select booklet stapling.
• Press [Start]. One sheet is folded.
12. Remove the sheet from the booklet output tray.
13. Hold the folded sheet with the creased side pointing down and face-up (the
same way that it came out of the finisher).
14. Referring to the diagram, determine if the skew is
SM
REPLACEMENT AND ADJUSTMENT
[A]
[B]
7
B836R901.WMF
+ –
[A] or [B].
B836