Ricoh B234 Service Manual page 1315

To remove the Rear Cabinet/Cover (B) of the StreamPunch,
Step 5:
A. Remove the 5 screws on Exit side and 2 screws on Entrance side.
B. Slide the Rear Sheet Metal Cabinet/Cover off of the StreamPunch.
NOTE:
To remove the J2 Flipper (C), Door Latch.
Step 6:
A. Remove only one (the one closest to the frame) of the "E" Rings of the J2 Flipper
on the right end (front Door side).
B. Push the J2 Flipper in toward the front Door until it clears the rear frame.
C. Pull the entire J2 Flipper, Door Latch out and set it aside.
Unhook spring from the Docking Plate (D) and Door. Remove the "4" screws that
Step 7:
secure the Docking Bracket. Remove, and set aside.
You do not need to lift upward and you do not need to remove the Top
Cover.
BINDER SIDE
B
31