Ricoh B234 Service Manual page 1316

PAPER ENTERANCE
SIDE
To remove the Rear Aligner, Idler Paper Guide Assembly
Step 8:
A. Remove "2" E-Rings from the Pivot Shaft.
B. Slide the Shaft all the way out through the front of the StreamPunch.
C. Remove the "2" Nylon Bearings.
D. Remove and set aside the Rear Aligner, Idler Paper Guide Assembly.
To remove the curved sheet metal Exit Paper Guide Assembly
Step 9:
A. Remove the "4" Screws (2 rear and 2 front) of the curved sheet metal Exit Paper
Guide Assembly
B. Unplug the Sensor
C.
Pull the entire sheet metal Exit Paper Guide Assembly out, set aside.
FRONT DOOR
SIDE
D
PAPER EXIT
SIDE
32