Planet WAP-4050 Manual Manual page 7

LED Indication
Ethernet LED
·
·
·
Wireless LED
·
·
·
Power LED
·
·
Physical Interface Description
Mode Selector This switch has 4 positions:
1 - AP Mode
2 - AP/Router Mode
3 - Config Mode
4 - Client Mode
Reset Button This button has 2 functions:
·
·
Ethernet Port Connect the 10/100BaseT Ethernet cable here.
·
Power LED
Wireless LED
Ethernet LED
On - Ethernet connection established.
Off - No Ethernet connection.
Flashing - Data being transferred.
On - Wireless interface available.
Off - Wireless interface unavailable.
Flashing - Data being transferred.
On - Power is available.
Off - No power.
Restart (reboot) - press & release.
Set all settings to factory defaults - press & hold (for 8 seconds), then
release.
Note: This should not be done while connected or using the WAP-4050.
In AP mode or AP/Router mode, this is connected to the LAN or WAN.
- 7 -