Planet WAP-4050 Manual Manual page 32

Idle time-out reached
Disconnecting
Error: Remote Server
not found
Error: PPP Connection
failed
Error: Connection to
Server lost
Error: Invalid or
unknown packet type
PPTP
If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed
when the Status button is clicked.
Connection
Physical Address
The connection has been idle for the time period specified in
the "Idle Time-out" field. The connection will now be
terminated.
The current connection is being terminated, due to either the
"Idle Time-out" above, or "Disconnect" button being clicked.
ISP's Server did not respond. This could be a Server problem,
or a problem with the link to the Server.
Unable to establish a PPP connection with the ISP's Server.
This could be a login problem (name or password) or a Server
problem.
The existing connection has been lost. This could be caused by
a power failure, a link failure, or Server failure.
The data received from the ISP's Server could not be
processed. This could be caused by data corruption (from a
bad link), or the Server using a protocol which is not supported
by this device.
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
- 32 -