Planet WAP-4050 Manual Manual page 30

Buttons
Release This button is only useful if the IP address shown above is allocated
(Renew) automatically on connection (Dynamic IP address). If you have a Fixed
(Static) IP address, this button has no effect.
·
·
Refresh Update the data shown on screen.
PPPoE
If your access method is Travel Mode or No Login, a screen like the following example will be
displayed when the Status button is clicked.
If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the
Status button is clicked.
Connection
Physical Address
IP Address
If the ISP's DHCP Server has NOT allocated an IP Address for the
WAP-4050, this button will say "Renew". Clicking the "Renew" button
will attempt to re-establish the connection and obtain an IP Address
from the ISP's DHCP Server.
If an IP Address has been allocated to the WAP-4050 (by the ISP's
DHCP Server), this button will say "Release". Clicking the "Release"
button will break the connection and release the IP Address.
The hardware address of this device, as seen by remote devices
on the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen from the Ethernet (WAN)
- 30 -