Table of Contents
Advertisement
Wireless
Region
Select your region from the drop-down list. This field displays the
region of operation for which the wireless interface is intended. It
may not be legal to operate the router in a region other than the
region shown here. If your country or region is not listed, please
check with your local government agency for more information on
which channels you are allowed to use, and select a region that
allows those channels. (The channel list changes according to the
selected region.)
SSID
This field allows you to set the SSID of WAP-4050 in AP mode. The
SSID is an identification string that differentiates from other WLANs.
AP Mode and AP/Router mode must use different SSIDs. Using the
same SSID for both modes would confuse Wireless clients. The
default value is default_Router.
Broadcast SSID
Enable or disable a Service Set Identifier broadcast. When enabled,
the SSID of the WAP-4050 is sent to wireless enabled devices on
the area, thus may cause unauthorized user to connect your
wireless networks.
802.11 Mode
Select the desired mode:
·
·
Channel No.
This selection determines which operating frequency will be used.
The channel list changes according to the selected region.
Select the desired channel. Adjacent Access Points should use
different channels to avoid interference.
Security
The current security settings for wireless connections are displayed.
The default value is Off, meaning no security.
Wireless
Click this button to access the Wireless Security sub-screen, and
Security
modify the security settings as required.
g & b - Both 802.11.g and 802.11b Wireless stations will be
able to use the WAP-4050.
g only - Only 802.11g Wireless stations can use the
WAP-4050, and obtain better performance than in g & b mix
mode..
- 21 -
Advertisement
Table of Contents
