Options
Respond to ICMP
Allow IPsec
Allow PPTP
Allow L2TP
The ICMP protocol is used by the "ping" and "traceroute" programs, and
by network monitoring and diagnostic programs.
·
If checked, the WAP-4050 will respond to ICMP packets received
via the WAN port.
·
If not checked, ICMP packets from the WAN port will be ignored.
Disabling this option provides a slight increase in security.
The IPSec protocol is used to establish a secure connection, and is
widely used by VPN (Virtual Private Networking) programs.
·
If checked, IPSec connections from the Wireless LAN are allowed.
·
If not checked, IPSec connections are blocked.
PPTP (Point to Point Tunneling Protocol) is widely used by VPN (Virtual
Private Networking) programs.
·
If checked, PPTP connections from the Wireless LAN are allowed.
·
If not checked, PPTP connections are blocked.
L2TP is a protocol developed by Cisco for VPNs (Virtual Private
Networks).
·
If checked, L2TP connections from the Wireless LAN are allowed.
·
If not checked, L2TP connections are blocked.
- 44 -