Planet WAP-4050 Manual Manual page 47

mode must be performed while in Config Mode. Please follow the procedures described in section 2.2
to access the Mode Configuration screen and click on the Configure button in Client Mode.
Wireless Profiles
Buttons
Wireless Client Profile
This screen is displayed when the Add or Edit button on the Client Mode Setup screen is clicked.
All available profiles are listed. For each profile, the following data is
displayed:
·
*
If a * is displayed before the name of the profile, this indicates the
profile is the current profile (it is enabled).
·
Profile Name
The current profile name is displayed.
·
[SSID]
The current SSID associated with this profile.
·
Type
The network type - Auto, Ad Hoc, or Infrastructure.
·
Security
The current security system (e.g. WEP ) is displayed.
·
Set as Current - Make the selected profile the current profile. The
selected profile will be enabled, and all other profiles will be
disabled.
·
Add - Create a new Profile.
·
Edit - Change the settings for the selected profile.
·
Delete - Delete the selected profile.
- 47 -