Extreme Networks BlackDiamond 8806 Hardware Installation Manual page 170

Repacking a BlackDiamond 8800 Series Chassis
7 Set a corner brace at each corner of the chassis, and slide the shipping carton down over the chassis
(see Figure 128).
Figure 128: Placing the Carton over the BlackDiamond 8806 Chassis
8 Insert the clip locks at the base of the shipping carton.
a Using your thumb and index finger, squeeze the prongs together.
b Push the clip lock into place and release the prongs.
Repeat these steps to insert each of the remaining clip locks.
CAUTION
Proper installation of the clip locks is critical for safe shipment of the BlackDiamond 8806 chassis. Make
sure that the clip locks are secure and accurately installed.
170
BD_298
BlackDiamond 8800 Series Switches Hardware Installation Guide