Installing The Power Supply - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

Installing the Power Supply

CAUTION
Make sure that the AC power supply circuit is not overloaded. Use proper over-current protection, such as
a circuit-breaker, to prevent over-current conditions.
To install an Extreme Networks AC power supply:
1 Verify that the power supply is right side up and the locking handle is open
Figure 65: Extreme Networks AC Power Supply with Locking Handle Open
2 Carefully slide the power supply all the way into the power supply bay
CAUTION
Do not slam the AC power supply into the system switch backplane. Use the locking handle to secure the
power supply in the power supply bay.
Figure 66: Inserting an AC Power Supply into the Power Supply Bay
BlackDiamond 8800 Series Switches Hardware Installation Guide
EX_015
EX_174
(Figure 65).
(Figure 66).
105