User-Marking/Highlighting - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3.18 User-Marking/Highlighting

can input the following marks on the chart.

●Event Mark :

During voyage, you can put an Event Mark at the ship position.

●Information Mark: You can put an Information Mark at any position.

●Tidal Stream Mark: You can put an Tidal Mark at any position. The speed (knot) and time can be input.

You can put a highlight area at any position for your reference.

3.18.1 Marking the Event Mark

(1) Event Marking using the display panel

During voyage, you can put an Event Mark ( ) at the point where your ship is located.

1) On the display panel

Left-click the [Event ]."Location/Attributes - Event Mark" panel opens.

- To check the Information on the Event Mark ,see 3.14 "Reading Out Information on the

(2) Event Marking using the menu

1) In the normal menu

Select [MENU] - [(6) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.

In the Table Editing menu, Graphic Editing menu

Select [MENU] - [(5) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.

In the User Chart Editing menu

Select [MENU] - [(4) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.

The "Location/Attributes - Event Mark" panel opens.

Tidal Stream Mark

Information Mark

3 Basic Operation of ECDIS