Configuring The Phone - Alcatel Temporis IP150 Manual

Configuring the Phone

You can configure the phone using one of three methods:
 From the phone itself, using the menus. The phone menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the phone menus are limited to network
settings. See Using the Admin Settings menu on page 15. Most of the settings
accessible on the phone itself are most useful for end users. Through the menu,
they can customize the screen appearance, sounds, and manage calls. For more
information, see the Temporis IP150 User Guide.
 The Web User Interface, or WebUI, which you access using your Internet browser.
See Using the WebUI on page 19. The browser-based interface is easy to navigate
and best-suited to configuring a large variety of phone settings. The WebUI has
every setting required for configuring a single phone. You can enter service
provider account settings on the WebUI, configure the programmable keys, and
set up provisioning, which will allow you to automatically and remotely update the
phone after initial configuration.
 The configuration file. Working with configuration files is the best way to
configuring multiple phones. There are several methods available to enable the
phone to find the configuration file. For example, you can enable the phone, when
it starts up or reboots, to check for the presence of a configuration file on a
provisioning server. If the configuration file is new or has been modified in any
way, the phone automatically downloads the file and applies the new settings. For
more information, see Provisioning Using Configuration Files on page 80.
Using the Phone Menu
The phone menu has four main sub-menus:
 Features—manage calls, view and add directory entries, view call history, access
messages, and use the speed dial menu.
 Status—view the deskset network status, account registration status, and
product information.
 User Settings—allows the user to set the language for the display, configure the
appearance of the display, customize the audio settings, and register a DECT
headset.
 Admin Settings—configure network settings (enter static IP addresses, for
example) and line settings.
This guide contains instructions for using the Admin Settings menu and for accessing the
Status menu. See the Temporis
and User Settings.
To use the phone menu:
1. When the phone is idle, press MENU.
The main menu appears.
2. Press  or  to highlight the desired sub-menu, and then press OK.
 You can also press a corresponding dial pad key to select a numbered menu item.
Press 2 for the Status menu, for example.
 Press OK or an appropriate soft key to save changes.
 Press to cancel an operation, exit the menu display or return to the idle
screen.
Temporis IP150 Administration and Provisioning Guide
IP150 User Guide for more information about Features
ed 0.1 13/106