Using The Webui - Alcatel Temporis IP150 Manual

Using the WebUI

The Web User Interface (WebUI) resides on your phone. You can access it using an
Internet browser. After you log in to the WebUI, you can configure the phone on the
following pages:
 System
SIP Account Management
o
Call settings
o
User Preferences
o
Programmable Keys
o
Memory Keys
o
Signaling Settings
o
Ringer Settings
o
 Network
Basic Network Settings
o
Advanced Network Settings
o
 Contacts
Local Directory
o
Blacklist
o
LDAP
o
Broadsoft
o
Call History
o
 Servicing
Reboot
o
Time and Date
o
Firmware Upgrade
o
Provisioning
o
Security
o
Certificates
o
System Logs
o
The WebUI also has a Status page, where you can view network status and general
information about your phone. The information on this page matches the Status menu on
the phone.
To access the WebUI:
1. Ensure that your computer is connected to the same network as your deskset. Your
computer may already be connected to the network through the PC port on the back
of your deskset.
2. Find the IP address of your phone:
a. When the phone is idle, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network status screen appears.
Note: Instead of steps a, b, c you can use the shortcut to Network status
(in idle mode press
d. On the Network status screen, note the IP Address.
Temporis IP150 Administration and Provisioning Guide
)
ed 0.1 19/106