Verifying The Installation; Idle Screen - Alcatel Temporis IP150 Manual

2. Assemble wall mount accessories as depicted
3. Connect the network cable(s) and power adapter (if required).
4. Hang the phone on the wall using the upper holes in the wallmount accessory.

Verifying the installation

Idle Screen

The idle screen appears after the phone is connected and configured for your SIP PBX
service. The idle screen indicates that you have no active or held calls.
Figure 2: Idle screen
Note "Line" softkey will be shown only if you have configured and registered more than
one sip account.
Temporis IP150 Administration and Provisioning Guide ed 0.1 12/106