Alcatel Temporis IP150 Manual page 85

Setting Up Provisioning
Set up your provisioning server and folders for provisioning files. The general and unit
configuration files should be in the same folder. Note the IP address, username and
password for access to the folder on the provisioning server.
The Provisioning Server Settings will enable the phone to find the general configuration
file. In most cases, default settings will make automatic provisioning possible out of the
box without any further action on the phone.
The phone will try first to retrieve configuration files location from the different DHCP
options, according to their priority. Options 66, 159 and 160 are supported, and either
http, https or tftp urls are accepted here.
If the phone does not succeed to find its configuration files in the urls provided in those
options, then the Server provisioning string will be used. The default value for this server
again allows plug and play automatic provisioning. Check with your distributor to find out
how to benefit from APRT service.
If none of these default settings suit your environment, you may have to fill in the server
type and address (including a full path to the general configuration file), port, username
and password.
Note you can modify Provisioning Server Settings via configuration files; so you could use
default settings to perform a first provisioning which rewrites these values to suit your
production needs.
Temporis IP150 Administration and Provisioning Guide ed 0.1 85/106