Alcatel Temporis IP150 Manual page 49

Enable PC Port VLAN
network.vlan.pc.enable
VLAN ID
network.vlan.pc.id
Priority
network.vlan.pc.priority
LLDP-MED
Setting
Enable LLDP-MED
network.lldp_med.enable
Packet Interval (secs)
network.lldp_med.interval
802.1x
Setting
Enable 802.1x
network.eapol.enable
Temporis IP150 Administration and Provisioning Guide
Enable if the PC connected to your
phone's PC port is part of a VLAN
on your network. Select to enable.
Enter the PC Port VLAN ID (vlan 5,
for example).
Select the VLAN priority that
matches the Quality of Service
(QoS) settings that you have set
for that VLAN ID. Outbound
packets will be marked and sent
according to their priority.
7 is the highest priority.
Note: Configuring the Quality of
Service (QoS) settings for your
router or switch is a subject
outside the scope of this
document.
Description
Enables or disables LLDP-MED on
the phone. Select (enable) if your
switch is LLDP-MED capable.
Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-
MED) is a standards-based
discovery protocol supported on
some network switches. Amongst
other functions, it enables network
devices (such as switches) and
endpoint devices (the deskset) to
manage PoE, and assists
administrators in tracking devices
on the network.
Enter here the interval in seconds
between LLDP packets.
Description
Enables the 802.1X authentication
protocol. This provides the phone
with secure access to the network
when an 802.1X compliant
authentication server is used.
Consult your service provider.
0:Disabled 0
1: Enabled
0–4095 0
0–7 0
Range Default
0:Disabled 0
1: Enabled
1–30 30
Range Default
0:Disabled 0
1: Enabled
ed 0.1 49/106