Machine Default; Offset Copying; Auto Rotation Copy; Margin Width Default Value - Kyocera TASKalfa 181 Service Manual

Offset copying

Determines whether or not the offset copy will be the
default setting in the initial mode.
1. Select [Offset] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.

Auto rotation copy

Determines whether or not the Auto Rotation mode will
be the default setting in the initial mode.
1. Select [Auto Rotation] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.

Margin width default value

Determines the default value of the location and width
of the margins in the margin mode.
1. Select [Margin Width] and then press the enter key.
2. Sets the margin widths and then press the enter
key.
Setting range: 1/8" to 3/4" in 1/8" increments (inch
specifications) 1 to 18 mm in 1mm increments
(metric specifications)
Border erase width default value
Determines the default value for the width of the border
to be erased in the two border erase modes.
1. Select [BorderEraseWidth] and then press the
enter key.
2. Sets the widths and then press the enter key.
Setting range: 1/8" to 3/4" in 1/8" increments (inch
specifications) 1 to 18 mm in 1mm increments
(metric specifications)
Limit of number of copies
Sets the limit for the number of copies (or copy sets)
that can be made at a time.
1. Select [Copy Limit] and then press the enter key.
2. Sets the copy limit and then press the enter key.
Setting range: 1 to 999
Black streaking reduction processing
Reduces black lines that may be caused when the DP
is used.
1. Select [Corr. Black line] and then press the enter
key.
2. Select [None], [Weak] or [Strong] and then press
the enter key.

(4) Machine default

Auto cassette switching
Turns automatic cassette switching ON or OFF.
1. Select [Auto Cassette SW] and then press the enter
key.
2. Select [On/All types of paper], [On/Only same
paper type] or [Off] and then press the enter key.
Paper size (cassettes 1 to 4)
Sets the size of paper that is loaded in cassettes 1
through 4.
1. Select one of the [Paper Size (1st) to (4th)] and
then press the enter key.
2. Select [Auto Detection Metric], [Auto Detection
Inch] or a paper size and then press the enter key.
Paper type (cassettes 1 to 4)
Sets the type of paper that is loaded in cassettes 1
through 4.
1. Select one of the [Paper Type (1st) to (4th)] and
then press the enter key.
2. Select the paper type and then press the enter key.
MP tray confirmation display
1. Select one of the [Check MP Tray] and then press
the enter key.
2. Select [On] or [Off] and then press the enter key.
Paper weight for paper type
Sets the paper weight for each paper type.
1. Select [P. type (Weight)] and then press the enter
key.
2. Select paper type and then press the enter key.
3. Select paper weight and then press the enter key.
Duplex print for paper type
Sets whether or not each custom type of paper (cus-
tom 1 to custom 8) will be available for use in duplex
printing.
1. Select [P. type (Duplex)] and then press the enter
key.
2. Select one of the [Custom 1 to 8] and then press
the enter key.
3. Select [On] or [Off] and then press the enter key.
Custom paper type
Sets whether or not to match the orientation in one-
sided printing and two-sided printing.
1. Select [Special P. type] and then press the enter
key.
2. Select [Match Print Direction] or [Fast Mode] and
then press the enter key.
2KJ/2KH
1-3-71