Adjusting The Deflection In The Paper - Kyocera TASKalfa 181 Service Manual

Maintenance
item No.

Adjusting the deflection in the paper

U051
Description
Adjusts the deflection in the paper.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
PF1
BYPASS
PF2
PF3
PF4
DUPLEX
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor left/right keys.
For output example 1, increase the value.
For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Paper feed from cassette
Paper feed from MP tray
Paper feed from optional first paper feeder (stan-
dard for 22ppm model)
Paper feed from optional second paper feeder
Paper feed from optional third paper feeder
Duplex mode (second side)
Original
example 1
Figure 1-3-4
Copy Copy
example 2
2KJ/2KH
Setting Initial
range setting
-50 to 127 30
-50 to 127 20
-50 to 127 0
-50 to 127 -20
-50 to 127 -20
-50 to 127 20
1-3-15