Panasonic KX-TDA50G Feature Manual page 72

4.1.5 DID (Direct Inward Dialing)
[Method Flowchart]
A CO line call is received on a DID line.
information and is CLI distribution
enabled for the DID number in the
Yes
been stored in the System Speed
Dialing Table and has a CLI destination
The call is routed to its
CLI destination.
[Programming Example: DID Table]
Location DID No.
*1
1 123-4567
123-2468
2
*1 ® 12.3 [10-3] DID Table—
® [451] DID Number
*2 ® 12.3 [10-3] DID Table—
® [452] DID Name
*3 ® 12.3 [10-3] DID Table—
*4 ® 12.3 [10-3] DID Table—
® [453] DID Destination
In this example:
72 Feature Manual
Is the DID number found in
the DID Table?
Yes
Does the call have Caller ID
current time mode?
Yes
Has the caller
been assigned?
No
Is a DID destination assigned
for the current time mode?
Yes
The call is routed to the
DID destination.
CLI Distribution
DID
Name
*2 Day Lunch
Enable Disable
Sales
Enable Disable
Judy
DID Number
DID Name
CLI Ring for DID—Day, Lunch, Break, Night
DID Destination—Day, Lunch, Break, Night
No
No
number match an extension
number at another PBX or CO
No
The call is routed to the
operator (Intercept
Routing—No Destination).
*3
Break Night Day
Enable Disable 105
Disable Disable 102
Does the DID
Yes
number match an
extension number?
No
The call is routed
to the extension.
Does the DID
Line Access no.?
No
The call is routed
to the TIE line or
CO line.
DID Destination
*4
Lunch Break Night
100 105 100
100 102 100
Document Version 2008-11
Yes