Panasonic KX-TDA50G Feature Manual page 19

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50G:
Table of Contents

Advertisement

Since the preferred carrier may vary depending on the time of day, you can create an ARS-specific time
table and break each day of the week into different time blocks. A different carrier can then be assigned
to each time block.
Routing Plan Time Table: For each Routing Plan, a different carrier can be assigned for each time of day
and each day of the week. Each day can have up to four programmable time blocks.
Routing Plan Priority: For each Routing Plan, a different carrier can be assigned a different priority for
each time of day. Generally, the carrier assigned to priority 1 will be used, however, if the CO lines assigned
to this carrier are busy, a different available carrier will be used according to priority level.
ARS Leading Number Table
Location
Leading
No.
1
2
01181
3
01144
ARS Routing Plan No. 1
Monday
Time Block A
Time Block B
Time Block C
Time Block D
® 10.4 [8-3] Routing Plan Time—Time Setting
*1
® [330] ARS Routing Plan Time Table
® 10.5 [8-4] Routing Plan Priority
*2
® [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)
® [347] ARS Routing Plan Table (1–48) (KX-TDA600 only)
5.
Carrier Table
Each carrier must be programmed in the Carrier Table. Here each carrier is assigned a carrier number,
name, the CO lines it is used with, etc.
® 10.6 [8-5] Carrier—Carrier
Carrier Name: Assign a name for the carrier. Used only as a reference.
Trunk Group: Assign the trunk groups which can be used when making calls via this carrier.
Carrier Access Code: Enter the carrier's access code. Consult carrier for details.
Removed Number of Digits: There may be circumstances where the user-dialed number must be
modified in order for the carrier to connect the call. In this case, enter here the number of digits to be
removed automatically from the beginning of the dialed number.
Modify Command: When a call is made using this carrier, the telephone number must be modified to meet
the criteria required by the carrier in order to connect the call. Program here the commands needed to
modify the user-dialed number as necessary.
Document Version 2008-11
Additional No.
No.
of Digits
1212
7
0
0
Time Table
*1
9:00
12:00
17:00
23:00
1.1.3 ARS (Automatic Route Selection)
Routing Plan
No.
1
5
12
Carrier
Priority 1
Priority 2
Carrier A
Carrier M
Carrier A
Carrier M
Carrier C
Carrier M
Carrier J
Carrier M
*2
Feature Manual
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda50Kx-tda600

Table of Contents