Cos (Class Of Service) - Panasonic KX-TDA50G Feature Manual

3.1.19 COS (Class of Service)

Feature Manual References
3.1.7 Call Splitting
3.1.8 Call Transfer
3.1.16 Conference
3.1.19 COS (Class of Service)
Description
Each extension must belong to a Class of Service (COS). By assigning certain extensions to a COS, it is
possible to control the behavior and privileges of extension users (allowing or denying certain extensions
access to various features, extensions, and CO lines) depending on the duties appointed to them.
Many extensions can belong to the same COS by assigning each extension the same COS number, allowing
the same restrictions and privileges to apply to a group of extensions.
The following features are controlled on a COS basis:
a. ® 9.1.14 Internal Call Block
b. ® 6.1.6 FWD (Call Forwarding)
c. ® 4.1.9 DND (Do Not Disturb)—DND Override
® 3.1.6 Call Pickup
d.
e. ® 1.1.2 Account Code Entry
® 3.1.14 CO Line Access
f.
g. ® 5.1.3 Executive Busy Override
h. ® 3.1.4 Call Monitor
i. ® 12.1.3 OHCA (Off-hook Call Announcement)
j. ® 20.1.3 Whisper OHCA
k. ® 17.1.6 TRS (Toll Restriction)
l. ® 5.1.4 Extension Dial Lock
m. ® 20.1.1 Walking COS
n. ® 3.1.15 CO Line Call Limitation
o. ® 3.1.8 Call Transfer
p. ® 4.1.10 Door Open
q. ® 4.1.7 DISA (Direct Inward System Access)
r. ® 20.1.4 Wireless XDP Parallel Mode
® 16.1.1 SMDR (Station Message Detail Recording)—SMDR for Outgoing CO Line Calls
s.
t. ® 17.1.5 Time Service—Time Service Switching
® 11.1.1 Manager Features
u.
v. ® 13.1.28 PT Programming
w. ® 13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension—SDN Key
mode, SDN Walking COS, and assigning SDN buttons through PT programming (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Conditions
•
Walking COS
Extension users can make a call from extensions of a less-privileged COS by using their own COS
temporarily. (® 20.1.1 Walking COS)
PC Programming Manual References
4.11 [2-7-1] Class of Service—COS Settings
62 Feature Manual Document Version 2008-11