Panasonic KX-TDA50G Feature Manual page 164

9.1.11 Intercept Routing
Type
No Destination
Intercept Routing redirects calls to destinations based on the original destination of the call, as shown in the
table below. Different intercept destinations can be programmed for each time mode. Note that calls redirected
by Intercept Routing—No Answer/DND are directed to the same destination, while Intercept Routing—Busy
is directed to a separate destination, and the intercept destination for Intercept Routing—No Destination is
always an operator.
When the original destination is:
•
Wired Extension (PT/SLT/T1-OPX)
•
PS
•
ICD Group
•
VM Group (DTMF/DPT)
•
DISA
*1
164 Feature Manual
If a call has no destination (i.e., if a destination is not assigned), the call is
redirected to an operator. (® 9.1.12 Intercept Routing—No Destination)
The destination assigned to the original extension.
6.1 [4-1-1] Wired Extension—Extension Settings—
Intercept Destination
→
→
6.10 [4-2-1] Portable Station—Extension Settings—
Intercept Destination
→
→
[604] Extension Intercept Destination
The ICD Group Overflow destination assigned to the
group. (® 9.1.5 ICD Group Features—Overflow)
5.12 [3-5-1] Incoming Call Distribution Group—Group
Settings—Overflow No Answer—
Manual Queue Redirection—Destination-Day, Lunch,
Break, Night
[625] Destination for Overflow Time Expiration
The destination assigned to the first extension of the
VM group.
If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
•
•
•
7.3 [5-3-1] Voice Message—DISA System—Option 1
—
are busy
Description
The Available Intercept Destination is:
Intercept Destination—When called party does
not answer—Day, Lunch, Break, Night
Intercept Destination—When Called Party is
Busy
Intercept Destination—When called party does
not answer—Day, Lunch, Break, Night
Intercept Destination—When Called Party is
Busy
Disable: Busy tone is sent to the caller. When
using an analog CO line, a ringback tone is sent.
Operator: The call will be redirected to the
operator.
AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
DISA Intercept—Intercept when all DISA ports
Time out &
Document Version 2008-11