Panasonic KX-TDA50G Feature Manual page 37

Conditions
•
Call Hold Limitation
A proprietary telephone (PT) user can hold one intercom call and/or multiple CO line calls at a time. A
single line telephone (SLT) user can hold either one intercom call or one CO line call at a time. By using
the Call Park feature, PT and SLT users can hold multiple CO line calls and intercom calls simultaneously.
(® 3.1.5 Call Park)
•
Music on Hold
Music, if available, is sent to the held party. (® 11.1.4 Music on Hold)
•
Hold Recall
If a call on hold is not retrieved within a preprogrammed time period, the Hold Recall tone is heard at the
extension which put the call on hold. If the extension is engaged in a call, the Hold Alarm will be heard.
•
If an outside party is placed on hold and the call is not retrieved within a preprogrammed time period after
the Hold Recall time expires, the call is automatically disconnected.
•
Automatic Call Hold
A PT can be configured through system programming to place the current call on hold when the PT user
presses a CO, ICD Group, INTERCOM or PDN button to make or answer another call. If this feature is not
enabled, the current call will be disconnected.
[Example of Automatic Call Hold]
It is possible to receive an incoming CO line call by pressing the flashing ICD Group button. The current
intercom call (on the INTERCOM button) is placed on hold. To return to the held call, press the INTERCOM
button.
•
Call Hold Retrieve Deny
Internal Call Block (® 9.1.14 Internal Call Block) also determines which extensions' calls an extension
user can retrieve, i.e., if extension 101 cannot call extension 201, then it cannot retrieve extension 201's
held calls either.
•
SLT Hold Mode
It is possible to choose how to hold and transfer a call with an SLT through system programming. The
following methods are available:
Flashing the
hookswitch
Mode 1
Going on-hook
Flashing the
hookswitch
Mode 2
(Default) Hold Feature No.
Going on-hook
Flashing the
hookswitch
Mode 3 Hold Feature No.
Going on-hook
Document Version 2008-11
Hold (to be Retrieved from
Another Extension)
Flashing the hookswitch
+ Hold Feature No.
Going on-hook
Flashing the hookswitch
+ Hold Feature No.
+ Going on-hook
Flashing the hookswitch
+ Hold Feature No.
+ Hold Feature No.
Going on-hook
Hold
Transfer to CO
*1
Flashing the
+ hookswitch
+ CO Line Access No.
Flashing the
+ hookswitch
+ CO Line Access No.
Flashing the
+ hookswitch
+ Hold Feature No.
+ CO Line Access No.
3.1.2 Call Hold
Transfer to
Line Extension
Flashing the
hookswitch
+ +
Extension No.
Flashing the
hookswitch
+ +
Extension No.
Flashing the
hookswitch
+ +
Extension No.
+
Feature Manual 37