Panasonic KX-TDA50G Feature Manual page 267

b.
Group Name: Can be displayed on a ringing PS to indicate that the incoming CO line call is a group call,
and not a call directed to the PS's extension number. This is only available when Incoming CO Line Call
Information Display is set to "Called Number".
c.
Incoming CO Line Call Information Display: Determines which information is shown on the PS display
when a group call is received. Select "Caller ID" to display the caller's telephone number or name,
or "Called Number" to display the name of the PS ring group which is receiving the call.
d.
Member PSs: Select each PS that will be a member of the corresponding PS ring group. Note that a PS
can belong to more than one PS ring group.
[Programming Example: PS Ring Group]
Floating Extension No.
Group Name
Incoming CO Line
Information Display
PS 1
PS 2
PS 3
PS 4
PS 5
PS 6
PS 7
PS 8
PS Ring Group Member
[Example of PS Ring Groups 1 and 2]
PS Ring Group 1
Floating Extension No. 301
Name: Sales 1
PS 1
Extn. 601 Extn. 602
Explanation:
PS Ring Group 1
PS 1, PS 2, and PS 3 will ring simultaneously when a call is directed to floating extension number 301, and,
in the case of a CO line call, will display the Caller ID information for the call.
These PSs will ring individually when a call is directed to their assigned extension numbers (programming not
shown here).
PS Ring Group 2
PS 3, PS 4, and PS 5 will ring simultaneously when a call is directed to floating extension number 302, and,
in the case of a CO line call, will display "Sales 2".
These PSs will ring individually when a call is directed to their assigned extension numbers (programming not
shown here).
Document Version 2008-11
PS Ring Group 1
301
Sales 1
Caller ID
Floating Extension No. 302
PS 2 PS 3
Extn. 603
PS Ring Group 2 PS Ring Group 3
302
Sales 2 Customer Service
Called Number
PS Ring Group 2
Name: Sales 2
PS 4 PS 5
Extn. 701 Extn. 702
13.1.27 PS Ring Group
303
Caller ID
Feature Manual 267