Panasonic KX-TDA50G Feature Manual page 105

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50G:
Table of Contents

Advertisement

Button
Flexible CO
INTERCOM
AUTO ANS (Auto Answer)/
MUTE
VOICE CALL/MUTE
AUTO DIAL/STORE
CONF (Conference)
FWD/DND
PAUSE
Soft
SELECT
SHIFT
MODE
[DSS Console]
Button
ANSWER
RELEASE
Flexible CO
Flexible DSS (Direct Station
Selection)
PF (Programmable Feature)
Conditions
Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.
Document Version 2008-11
Used to access a CO line or trunk group when making or receiving a call
according to the button's preprogrammed CO Line Access method
(Default: S-CO). Can also be customized as a different feature button.
Used to make or receive intercom calls.
Used to receive an incoming call in hands-free mode, or used to mute
the built-in microphone or handset during a conversation.
Used to monitor an intercom call automatically (a hands-free
conversation is not possible). Also used to mute the handset during a
conversation.
Used for System/Personal Speed Dialing and storing program changes.
Used to establish a multiparty conversation.
Used to set Call Forwarding (FWD) or Do Not Disturb (DND).
Used to insert a dialing pause in a stored number. Also used as the
Program button on analog proprietary telephones (APTs) which do not
have the PROGRAM button.
Used to select the item displayed on the bottom line of the display.
Used to select the displayed item or to call the displayed number.
Used to access the second level of Soft button items.
Used to change the current display to access various features.
Used to answer an incoming call, or place the current call on hold and
answer another call with a one-touch operation.
Used to disconnect the line during or after a conversation, or to complete
a Call Transfer.
Used to access a CO line or trunk group when making or receiving a call
according to the button's preprogrammed CO Line Access method. Can
also be customized as a different feature button.
Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customized as other different feature buttons.
Used to access a preprogrammed feature with a one-touch operation.
(no default)
6.1.1 Fixed Buttons
Usage
Usage
Feature Manual
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda50Kx-tda600

Table of Contents