Panasonic KX-TDA50G Feature Manual page 161

CO Line Port (Channel)
Card
LCOT
ELCOT / LCOT
T1
TIE (E&M)
OPX (EXTN.)
Extension
PRI
QSIG-Master
QSIG-Slave
IP-GW
Default
Available
2.
Distribution Method
Each public CO line port (channel) can use a different method of directing calls to their destinations as they
are received.
Distribution Method
Direct In Line (DIL)
Direct Inward Dialing
(DID)
Calling Line Identification (CLI) distribution is the most customizable call distribution method available. It
allows calls from specific people to be directed to specific destinations, based on the callers' telephone
numbers. CLI distribution, when enabled for the current time mode, takes precedence over DIL or DID
distribution.
Distribution Method
Calling Line Identification
(CLI) Distribution
Document Version 2008-11
Networking Type
Type
Public
GCOT
DID
CO
Directs a call to a preprogrammed destination,
such as an operator, based on the CO line carrying
the call.
Directs a call received on a DID line to a
preprogrammed destination based on the
telephone number dialed by the caller.
Directs a call to its preprogrammed destination if
the caller's telephone number and its CLI
destination has been stored in the System Speed
Dialing Table.
9.1.10 INCOMING CALL FEATURES
Private
Description
Description
Details in
® 4.1.6 DIL (Direct
In Line)
® 4.1.5 DID (Direct
Inward Dialing)
Details in
® 3.1.12 CLI
(Calling Line
Identification)
Distribution
Feature Manual 161