Connecting The Power Cord - SATO Cl4NX Operator's Manual

2.5 Connecting the Power Cord

WARNING
• Do not touch the power button, connect or disconnect the power cord with wet hands. Doing so could cause
electric shock.
• Always connect the ground wire to a ground terminal. Electric shock could occur if you do not do so.
Notes
• The attached power cord is exclusive for this printer.
• Do not use the attached power cord with other devices.
1
Connect the power cord to the AC input
terminal at the rear of the printer.
Take note of the orientation of connector. Secure
the printer with one hand, and insert the
connector tightly.
2
Insert the power plug into an AC outlet.
Make sure that the AC voltage of your region is in
the range of AC 100 - 240 V, 50 - 60 Hz. If your
local voltage is not in the stated range, contact
your SATO reseller or technical support center.
*The shape of the power plug varies depending
on the region in which it was purchased.
2 Installing the Printer
1
*
CL4NX Operator Manual
23