Advertisement
1 Engage the catch prns cn the Pernoval tool and remove
the two locks otn the lower level.
Lower the .f~arne and pull it forward as shown 111 the
figure.
When .the lower level IS renroved. remove the upper two
IOllS.
The frame can be removecl from the top side in the same
manner.
'1 Refer to the sectron "Rernovtng the i--lard Rubber Frame" and then
remove the hard rubber frame.
Remove the Hex-head screw wrth rntegral washer iM4s6) on the
baclc panel.
Insert the two removal tools deeply Into the slots on each srde, as
shown.
Lower tire removal tool toward the bottom, and pull out the unit
halfway while pressrng towards the rnstde.
Be careful to avoid mfury fr-om the catch pins on the removal tool.
Pull the unn all the way out with your hands, being careful not to
drop it.
Advertisement
