Download Print this page

Kenwood KVT-911DVD Instruction Manual page 16

Kvt-911dvd television with dvd receiver
Hide thumbs Also See for KVT-911DVD:

Advertisement

Each time you touch [ Screen 1, the mode
specifrcatron IS played 111 a letter box screen (with
es on the top and bottom).
en software
wrth pan & scan
specrfrcatron IS played In a panned & scanned
screen (with the left and rrght sides cut off).
Is 169 pE
Set the picture mode of the wide-screen
monrtor
to "FULL"
Touch [ Menu Lang I to switch the language select
screen. <see p.l8>
Touch [ Suhtrtle 1 to switch the language select
screen. <see p. 1 D>
The language selected tn the rnitial setup IS used
rmmedrately after turnrng power on or replacing
disc. If the rnrtrally set language does not exist In
the disc, the pnonty language defined for each
disc IS used.
udro I to switch the language select
screen. <see p.18>
m
The lanyuage selected rn the rnrtral setup IS used
imrnedrately
after turnrng power on or replacing
disc. if the rnrtrally set language does not exist In
the disc, the pnonty language defined for each
drsc IS used.
Each trme you touch I Angle Mark I, the mode
swatches as -follows:
as follows:
Is ~~~~~~~~ aa
F
werful sound at regular volumes
/(I
F
I sound at low volumes
riizg
Dorng this operatron may raise the sound level.
For the regular sound
m
This select can be made when the Dolby Digctal
srgnal IS rnputed.

Advertisement

loading