Advertisement
a When mounting the malrl unit afler checking ihe operation,
close the monitor first.
*During
Install&on,
do not use any screws except for those provided. The use of different
screws might result In
darnage to the tnaln unit.
* Damaae rnav occur if a screwdriver
or similar tool IS used with excessive force durmq the Installations.
rjG-G"y
Make sure that ihe unit is Installed securely in place. If the unit IS unstable, II tnay malfunction.
Accessor-y
ilt__Metal rnounl~ng strap
\
Self-tapping screw
icommerclally available)
When handling an optical cable for wmng, use care not .to exceed the
mlnlmum
cable bend radius of 30 mm If you exceed the mlnlrnum
bend Ilmlt, optical fibers within the optlcal cable may be damaged.
When installing the DVD player unit on the vehicle, ensure thal ihe
ope;cal cable is not stuck between the IND player unit and vehicle
parts.
1 Refer to the section "Removing the hard
rubber frame (P.63)" and then remove the
hard rubber frame.
Align the holes 11~ the unit itwo locatlons on
each side) with the vehicle mounting
bracket
and secure the unit with the accessory
screws.
Accessory :E;. .for Nissan car
Accessory :LJ . ..lor Toyota car
1 Attach the lnstallatlon brackets to the srdes of the
2 Use .the tapplng screw (04 x 16 mm) to secure the
hideaway unit using the sems bolts (M4 x 8 mm).
hideaway unit to the audio board.
Installatton brackets
(Accessory '@i
Advertisement
