Table of Contents
Advertisement
Sending Files to a Shared Network Folder
This section explains how to specify the destination when sending files to a shared network folder.
• The shared folder must have been created on the client computer in advance. For details about creating
shared folders, see Windows Help.
• Depending on the operating system of the client computer, access to the shared folder may require
authentication.
• This machine does not support DFS (Distributed File System).
You can send a file to a shared folder over the network by any of the following methods:
• Enter the path to the destination directly
• Specify the path by browsing the network for the destination
Entering the path to the destination manually
You can enter the path to the destination folder manually.
1.
Press [Manual Entry].
2.
Press [SMB].
3.
Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
4.
Enter the path for the folder.
The following is an example of a path where the folder name is "user" and the computer name is
"desk01": \\desk01\user.
Instead of the computer name, you can also use its IPv4 address.
5.
Press [OK].
6.
Depending on the destination setting, enter the user name for logging on to the computer.
Press [Manual Entry] to the right of the user name field to display the soft keyboard.
Specifying Scan to Folder Destinations
2
65
Advertisement
Table of Contents
