Table of Contents
Advertisement
About the Scanner Functions
This section describes functions you can use in the scanner mode.
You can use the scanner functions to send scan files to computers, scan originals from a computer using
the TWAIN driver, or store scan files on the machine's hard disk.
For details about each function, see respective chapters.
Sending scanned files (Network Scanner)
Scan files can be sent to or stored on a computer, and you can specify the format of a scan file
according to how the file will be used.
• Sending by e-mail
You can send scan files to specified e-mail addresses.
For details, see chapter 1 "Sending Scan Files by E-mail".
• Sending to folders
Scan files can be stored in shared network folders, or on FTP or Netware servers.
For details, see chapter 2 "Sending Scan Files to Folders".
• Sending using WSD
You can use Web Services on Devices (WSD) to send scan files to a client computer.
For details, see chapter 3 "Sending Scan Files Using WSD".
Scanning originals from a client computer (TWAIN Scanner)
You can use the TWAIN driver to scan originals from networked client computers.
For details, see chapter 6 "Scanning Originals with the Network TWAIN Scanner".
Storing files
Scan files can be stored on the machine's hard disk. You can do various things with files that are stored
on the hard disk, such as save them in shared folders or send them by e-mail.
For details, see chapter 4 "Storing Files Using the Scanner Function".
• This machine's scanner functions are only available as network functions. They are not available
through direct (USB) connection.
• p.19 "Sending Scan Files by E-mail"
• p.51 "Sending Scan Files to Folders"
• p.75 "Sending Scan Files Using WSD"
• p.111 "Scanning Originals with the Network TWAIN Scanner"
• p.91 "Storing Files Using the Scanner Function"
11
Advertisement
Table of Contents
