Table of Contents
Advertisement
6. Various Scan Settings
4.
Select the number of the program in which you want to register the settings.
Program numbers with
5.
Enter the program name.
6.
Press [OK].
The Program screen reappears. When the settings are successfully registered,
side of the registered program number and the program name appears on the right side. The initial
screen reappears after a moment.
Recalling a Registered Content
To recall settings registered in a program and use them for scanning:
1.
Press the [Program] key.
2.
Press [Recall].
6
3.
Press the number of the program you want to recall.
Settings registered in the program are recalled and the initial scanner screen reappears.
Settings are not registered in numbers that appear without .
4.
Place originals, and then press the [Start] key.
Changing a Registered Program
To change the settings registered to a program:
1.
Press the [Program] key.
2.
Press [Recall].
3.
Press the number of the program you want to change.
Settings registered in the program are recalled and the initial scanner screen reappears.
4.
Change settings of the program.
150
already have settings in them.
appears on the left
Advertisement
Table of Contents
