Table of Contents
Advertisement
6. Various Scan Settings
bottom edge touches rear of ADF
bottom edge placed first
6
• Originals are normally rectangular ( ) or horizontally long ( ). However, the table above uses
squares to make original orientation easier to understand. Even if the actual shape of the original is
different, the combination of original orientation and the orientation specified on the scanner driver
does not change.
• When you specify full color, gray scale, or [Auto Colour Select] for Scan Type, and single page TIFF/
JPEG or multi-page TIFF is selected as the file type, refer to the table below for how to place originals.
Originals placed in orientations that are not recommended in the table might appear incorrectly top/
bottom oriented on client computer displays.
How to set an original
Placing an Original on the Exposure Glass
Placing an Original in the ADF
132
Original orientation
BPS007S
BPS009S
BPS011S
Place
Control panel key
(Reverse Orientation: OFF)
(Reverse Orientation: ON)
(Reverse Orientation: ON)
Original orientation
Advertisement
Table of Contents
